<![CDATA[Ron's Machining Service: New Products - Tools]]> https://www.ronsmachiningservice.net Fri, 24 Apr 2026 08:42:11 +0000 <![CDATA[Pinion Yoke Holder Tool]]> https://www.ronsmachiningservice.net/tools/pinion-yoke-holder-tool/ Tue, 22 Oct 2013 19:56:55 +0000 https://www.ronsmachiningservice.net/tools/pinion-yoke-holder-tool/ Pinion Yoke Holder Tool

Yoke holder tool, fits most yokes. 1310/1330/1350/1410/7260/7290/MR3/Toyota.

 

Price: $140.00

]]> Pinion Yoke Holder Tool

Yoke holder tool, fits most yokes. 1310/1330/1350/1410/7260/7290/MR3/Toyota.

 

Price: $140.00

]]> Yoke holder tool, fits most yokes. 1310/1330/1350/1410/7260/7290/MR3/Toyota.

 

]]> <![CDATA[Traclok Assembly Tool]]> https://www.ronsmachiningservice.net/tools/traclok-assembly-tool/ Tue, 22 Oct 2013 19:51:31 +0000 https://www.ronsmachiningservice.net/tools/traclok-assembly-tool/ Traclok Assembly Tool

TracLoc assembly tool with 2 bolts, 1 nut, 3 washers.

 

Price: $130.00

]]> Traclok Assembly Tool

TracLoc assembly tool with 2 bolts, 1 nut, 3 washers.

 

Price: $130.00

]]> TracLoc assembly tool with 2 bolts, 1 nut, 3 washers.

 

]]> <![CDATA[Shim Driver Set]]> https://www.ronsmachiningservice.net/tools/shim-driver-set/ Tue, 22 Oct 2013 19:43:32 +0000 https://www.ronsmachiningservice.net/tools/shim-driver-set/ Shim Driver Set

This shim driver tool works on a variety of applications including:  - GM 7.5", 8.2", 8.5", 8.6", 12P, 12T,   - Ford 7.5", 8.8", 9.75", 10.25", 10.5",   - Model 35, Dana 44HD, Dana 44 JK, and more!

 

Price: $160.00

]]> Shim Driver Set

This shim driver tool works on a variety of applications including:  - GM 7.5", 8.2", 8.5", 8.6", 12P, 12T,   - Ford 7.5", 8.8", 9.75", 10.25", 10.5",   - Model 35, Dana 44HD, Dana 44 JK, and more!

 

Price: $160.00

]]> This shim driver tool works on a variety of applications including:  - GM 7.5", 8.2", 8.5", 8.6", 12P, 12T,   - Ford 7.5", 8.8", 9.75", 10.25", 10.5",   - Model 35, Dana 44HD, Dana 44 JK, and more!

 

]]> <![CDATA[ Large Clamshell Bearing Puller Tool]]> https://www.ronsmachiningservice.net/tools/large-clamshell-bearing-puller-tool/ Tue, 22 Oct 2013 19:07:57 +0000 https://www.ronsmachiningservice.net/tools/large-clamshell-bearing-puller-tool/ Large Clamshell Bearing Puller Tool

The RMS carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25" & 10.5" Ford, or GM & Chrysler 11..

Price: $550.00

]]> Large Clamshell Bearing Puller Tool

The RMS carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25" & 10.5" Ford, or GM & Chrysler 11..

Price: $550.00

]]> The RMS carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25" & 10.5" Ford, or GM & Chrysler 11..]]> <![CDATA[ Clamshell Bearing Puller Tool]]> https://www.ronsmachiningservice.net/tools/clamshell-bearing-puller-tool/ Tue, 22 Oct 2013 19:05:16 +0000 https://www.ronsmachiningservice.net/tools/clamshell-bearing-puller-tool/ Clamshell Bearing Puller Tool

The RMS carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard 3/4 ton applications. It is not compatible with Dana 70HD, Dana 80, 10.25" &..

Price: $568.00

]]> Clamshell Bearing Puller Tool

The RMS carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard 3/4 ton applications. It is not compatible with Dana 70HD, Dana 80, 10.25" &..

Price: $568.00

]]> The RMS carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard 3/4 ton applications. It is not compatible with Dana 70HD, Dana 80, 10.25" &..]]> <![CDATA[Dana 80 & AAM 11.5" Spindle Boring Tool]]> https://www.ronsmachiningservice.net/tools/dana-80-aam-11-5-spindle-boring-tool/ Tue, 22 Oct 2013 18:56:42 +0000 https://www.ronsmachiningservice.net/tools/dana-80-aam-11-5-spindle-boring-tool/ Dana 80 & AAM 11.5" Spindle Boring Tool

Dana 80 & GM/Chrysler 11.5" spindle ID boring tool for 37 & 38 spline axle conversion. Cutting bit diameter is 1.630". 

Application: Dana 80 and AAM 11.5" rearends (upgrading to 37 or 38 spline axle..

Price: $650.00

]]> Dana 80 & AAM 11.5" Spindle Boring Tool

Dana 80 & GM/Chrysler 11.5" spindle ID boring tool for 37 & 38 spline axle conversion. Cutting bit diameter is 1.630". 

Application: Dana 80 and AAM 11.5" rearends (upgrading to 37 or 38 spline axle..

Price: $650.00

]]> Dana 80 & GM/Chrysler 11.5" spindle ID boring tool for 37 & 38 spline axle conversion. Cutting bit diameter is 1.630". 

Application: Dana 80 and AAM 11.5" rearends (upgrading to 37 or 38 spline axle..]]> <![CDATA[Cross Pin Bolt Extracting Kit]]> https://www.ronsmachiningservice.net/tools/cross-pin-bolt-extracting-kit/ Tue, 22 Oct 2013 18:43:39 +0000 https://www.ronsmachiningservice.net/tools/cross-pin-bolt-extracting-kit/ Cross Pin Bolt Extracting Kit

Cross pin Bolt Extracting kit.

Application: Broken cross pin retaining bolts

 

Price: $130.00

]]> Cross Pin Bolt Extracting Kit

Cross pin Bolt Extracting kit.

Application: Broken cross pin retaining bolts

 

Price: $130.00

]]> Cross pin Bolt Extracting kit.

Application: Broken cross pin retaining bolts

 

]]> <![CDATA[Dodge Chrysler 7.25", 8.25", & 9.25" Spanner Tool]]> https://www.ronsmachiningservice.net/tools/dodge-chrysler-7-25-8-25-9-25-spanner-tool/ Tue, 22 Oct 2013 18:34:09 +0000 https://www.ronsmachiningservice.net/tools/dodge-chrysler-7-25-8-25-9-25-spanner-tool/ Dodge Chrysler 7.25", 8.25", & 9.25" Spanner Tool

Spanner tool used for adjusting carrier for backlash and bearing preload. No Returns on Tools

Application: Chrysler 7.25", 8.25", and 9.25" rearends

 

Price: $150.00

]]> Dodge Chrysler 7.25", 8.25", & 9.25" Spanner Tool

Spanner tool used for adjusting carrier for backlash and bearing preload. No Returns on Tools

Application: Chrysler 7.25", 8.25", and 9.25" rearends

 

Price: $150.00

]]> Spanner tool used for adjusting carrier for backlash and bearing preload. No Returns on Tools

Application: Chrysler 7.25", 8.25", and 9.25" rearends

 

]]> <![CDATA[1988-2006 GM 8.25" IFS Spanner Tool]]> https://www.ronsmachiningservice.net/tools/1988-2006-gm-8-25-ifs-spanner-tool/ Tue, 22 Oct 2013 18:27:02 +0000 https://www.ronsmachiningservice.net/tools/1988-2006-gm-8-25-ifs-spanner-tool/ 1988-2006 GM 8.25" IFS Spanner Tool

Spanner tool used for adjusting carrier for backlash and bearing preload. No Returns on Tools

Application: 1988-2006 GM 8.25" IFS front end

 

Price: $150.00

]]> 1988-2006 GM 8.25" IFS Spanner Tool

Spanner tool used for adjusting carrier for backlash and bearing preload. No Returns on Tools

Application: 1988-2006 GM 8.25" IFS front end

 

Price: $150.00

]]> Spanner tool used for adjusting carrier for backlash and bearing preload. No Returns on Tools

Application: 1988-2006 GM 8.25" IFS front end

 

]]> <![CDATA[Suzuki Samurai Spanner Tool]]> https://www.ronsmachiningservice.net/tools/suzuki-samurai-spanner-tool/ Tue, 22 Oct 2013 18:25:19 +0000 https://www.ronsmachiningservice.net/tools/suzuki-samurai-spanner-tool/ Suzuki Samurai Spanner Tool

Spanner tool used for adjusting carrier for backlash and bearing preload. No Returns on Tools

Application: Suzuki Samurai

 

Price: $130.00

]]> Suzuki Samurai Spanner Tool

Spanner tool used for adjusting carrier for backlash and bearing preload. No Returns on Tools

Application: Suzuki Samurai

 

Price: $130.00

]]> Spanner tool used for adjusting carrier for backlash and bearing preload. No Returns on Tools

Application: Suzuki Samurai

 

]]>